Sub MDF or White Acrylic Rectangle with Hole Key Chains - 4 Sizes Available

Double Sided MDF Sublimation or White Acrylic Rectangle with Hole Key Chain. 

1.7" x 3.15"

1.9" x 3.54"

2.4" x 3.8"

3" x 4.4"

Suggested Pressing 

• Temperature: 370 F
• Time: 60 seconds 
• Pressure: Medium
• Let completely cool before pressing the back side

NOTE:

• The recommended settings above may need adjustments for the best results. Settings will vary depending on the heat press brand and model ink and paper and atmospheric conditions.
• The substrate should be at room temperature
• As with any wood product, warping may occur when heat pressing.  By giving the product counter pressure after the sublimation process the panel is pulled straight again.  Counter-pressure should be applied while product is cooling down with a cooling weight with substrate face down on firm surface.