Sublimation MDF Name Badge 1.5" x 3"

MDF Sublimation Name Badge (with Adhesive Pin Add On if desired)

Suggested Pressing 

• Temperature: 370 F
• Time: 50 seconds to 55 seconds
• Pressure: Light

NOTE:

• The recommended settings above may need adjustments for the best results. Settings will vary depending on the heat press brand and model ink and paper and atmospheric conditions.
• The substrate should be at room temperature
• As with any wood product, warping may occur when heat pressing.  By giving the product counter pressure after the sublimation process the panel is pulled straight again.  Counter-pressure should be applied while product is cooling down with a cooling weight with substrate face down on firm surface.