Double Sided Sublimation Aluminum Business Card 3.4" x 2.1" - WITH BUNNY LICENSE WHEN PURCHASE 25+

Aluminum business card sublimation blanks with a very light shimmer will give you professional looking results. Popular uses for Santa license, Tooth Fairy ID, Child ID Card and pet ID card. Sets of 1, 10, 25 or 50.

** Double sided - designs can be imaged to both sides.

BUNNY LICENSE INCLUDED WHEN YOU PURCHASE 25+ CARDS

DIMENSIONS:
3.4 x 2.1 x .009 inches

Recommended Pressing:
1. Print image in reverse.
2. Cover the Bottom Table with a sheet of protective paper.
3. Use Heat Tape to attach your image to the card.
4. Place the card face up, with the image face down, on top of the protective paper on the Bottom Table.
5. Cover with a sheet of protective paper.
6. Allow the card to cool completely and repeat steps 1-5 for the second side.

** Do not stack when hot **

Time: 60 Seconds
Temperature: 370° C
Pressure: Medium

NOTE:

• The recommended settings above may need adjustments for the best results. Settings will vary depending on the heat press brand and model ink and paper and atmospheric conditions.
• The substrate should be at room temperature